Skip to main content
Last updated: 12/2018

LabSat 3 Firmware

Version: 01.09b1099
Upgrade Instructions

NOTE: Only LabSat 3 customers with unit serial numbers 033353 or above can use firmware version 01.05b1033 and higher to enable CAN arbitration.

LabSat 3 customers with unit serial numbers lower than 033353 that have not been upgraded (purchased before the end of March 2014) will need to send the unit in for an upgrade.

For more information on the remote control function please contact your distributor or write to labsat@racelogic co.uk.

Last updated: 5/2024

SatGen 4 Software

Version: 4.1.17

This is a full version of SatGen which runs with the dongle (?) you receive when purchasing the software. Without the dongle, the software is restricted to run for only 120 seconds when creating GPS only scenarios.

USB dongles supplied with SatGen 3 are fully compatible with SatGen 4.

If you are currently using the SatGen API, please email Support to request an updated API version that is compatible with this software.

Last updated: 9/2022

SatGen v3 Software

Version: 3.14.27

This is a full version of SatGen which runs with the dongle (?) you receive when purchasing the software. Without the dongle, the software is restricted to run for only 120 seconds when creating GPS only scenarios.

If you are currently using the SatGen API, please contact requesting an updated API version compatible with this software (3.14.27).

Last updated: 11/2023

RACELOGIC Upgrader

Version: 1.28.261
Required to upgrade LabSat 2

Last updated: 02/2014

LabSat 3 PC Comms Driver

Version: 6.8.8.0

LabSat 3 Communication Drivers are required to connect a Windows PC to the LabSat for NMEA data via the A to B USB cable.

Stay up-to-date

Are you interested in LabSat product updates, information on the latest software releases, events and offers? Join our mailing list today.