Record & Replay up to 4 Constellations & 20 Satellite Signals simultaneously
LabSat 3 WIDEBAND captures and replays more GNSS signals at much higher resolution than before.
With three channels, a bandwidth of up to 56MHz and 6 bit sampling (3 bit I & 3 bit Q), LabSat 3 WIDEBAND can handle almost any combination of constellation and signal that exists today, with plenty of spare capacity for future planned signals.
LabSat 3 WIDEBAND can record and replay the following signals:
- GPS: L1 / L2 / L5
- GLONASS: L1 / L2 / L3
- BeiDou: B1 / B2 / B3
- QZSS: L1 / L2 / L5
- Galileo: E1 / E1a / E5a / E5b / E6
- IRNSS: L5
- SBAS: WAAS, EGNOS, GAGAN, MSAS, SDCM
Small, battery powered and with a removable solid state disk, LabSat 3 WIDEBAND allows you to quickly gather detailed, real world satellite data and replay these signals on your bench.
Features and Applications
LabSat 3 Wideband is suitable for the testing and development of a whole host of products within a wide variety of applications:
Integral HTML Interface for Configuration
You can see a demo of the LabSat 3 Wideband Web Interface here.
The image above shows an example test setup within the LabSat 3 Wideband web server. All GNSS signals and one signal band are selected, a bandwidth of 56 MHz around the centre frequency of 1580 MHz, and a current quantisation of 1.
LabSat 3 Wideband has three bandwidth settings. 56 MHz, 30 MHz and 10 MHz.
The bandwidth of the GNSS signals varies, for example a GPS L1 C/A code signal has a bandwidth of 24 MHz. However, due to the signal design a bandwidth of 9.66 MHz will capture enough data to allow the receiver under test to acquire, track and navigate as with LabSat 3 single, dual and triple constellation devices.
Other signals with a different signal design like Galileo E1 PRS signal has a bandwidth of 46 MHz and a signal design spread across the bandwidth.
Many other signals have a similar requirement like GPS L1/L2 P code and M code. LabSat 3 Wideband has been designed to capture all these signals.
LabSat 3 Wideband is designed to capture and replay GNSS signals in the upper L-Band (1559 - 1610 MHz) and lower L-Band (1164 - 1300 MHz).
LabSat 3 Wideband can record and replay GNSS Signals at quantisation levels of:
- 3 bits (3 bit I + 3 bit Q)
- 2 bits (2 bit I + 2 bit Q)
- 1 bits (1 bit I + 1 bit Q)
LabSat Recording Capability Comparison
Recording and Replay of Additional Signals
LabSat 3 Wideband can record a range of additional signals, synchronised to the GNSS input: dual-CAN, RS232, and digital inputs are simultaneously captured increasing the level of playback realism and allowing for a wider range of testing. This flexibility means that the development of products incorporating this variety of signal streams can be conducted with absolute convenience on the bench, without the need for costly and time consuming field trials. NMEA data is also recorded via the inbuilt GNSS receiver.
Can I test with an internal antenna & no external antenna connector?
Please note that you need to be in an RF-screened environment to avoid interference with live signals. This can be done in a fully screened RF room or a portable enclosure, such as the LabSat Test Enclosure. The LabSat Test Enclosure allows for secure screened testing and is ideal when working with devices that do not have an external antenna connector - such as wearables, smartphones, and sports/fitness trackers.
Future-Proofing Your Products
With LabSat 3 Wideband, you are able to develop your products and systems in readiness for new GNSS receivers capable of using the signals that will start to broadcast within the next few years. With the advent of L2C, L5, and L1C, the next generation of GNSS devices will have increased accuracy and capabilities - LabSat 3 Wideband gives you the opportunity to develop your products to be compatible with new receivers as they come to market.
|LabSat 3 Wideband|
|Constellations||GPS L1, L2, L5; Galileo E1, E5a/b, E6; GLONASS L1, L2, L3; BeiDou B1, B2, B3; QZSS L1, L2, L5; IRNSS L5; In Band SBAS, user defined frequency bands like Iridium & SiriusXM radio|
|Output Signal Level||Adjustable -73 dBm to -160 dBm|
|RF Channel 1 Centre Frequency||Selectable|
|RF Channel 2 Centre Frequency||Selectable|
|RF Channel 3 Centre Frequency||Selectable|
|Number of Satellites Observed||All in view|
|Sampling Frequency||10.23 MHz, 30.69 MHz, 58 MHz|
|Bandwidth||10 MHz, 30 MHz, 56 MHz|
|Quantisation||1, 2 or 3 bit (I&Q)|
|Data Format||I & Q|
|Additional Logging||2x CAN channels, 4x Digital channels, 1x RS232 channel|
|Removable Battery Pack||Yes|
|Media Storage Included||1TB Solid State HDD, 4GB SD Card (SD card for firmware upgrades only)|
|Active Antenna Voltage Supply||3.3 v|
|Reference Oscillator||10 MHz OCXO, Temperature Stability +/- 0.05 ppm, Frequency Stability +/-0.3 ppm over first year|
|Operating Voltage||8v to 30 VDC|
|Size||167 mm x 128 mm x 46 mm|
LabSat 3 Test Enclosure
RLACS219 antenna included. More info.
Passive Rebroadcast Antenna
LabSat 3 Wideband
LabSat 3 Locking Expansion Connector