Step by Step instructions to upgrade LabSat 2

Posted in Other

Upgrade your firmware

  • Download the Racelogic Upgrader software that is used to upgrade your LabSat 2.
  • Unzip and install the software by running the Setup executable file.
  • Plug the upgrade jumper (RLACS161) into the LabSat 2 D-type connector.
  • Connect the power supply to the LabSat 2.
  • Connect the mini-USB cable between the "GPS Monitor" port on the LabSat 2 and the computer.
  • Download the latest LabSat 2 firmware.
  • Unzip and double click on the firmware upgrade .RUF file.
  • The upgrade process will start automatically once you have confirmed that the upgrade pin has been grounded in step 3.
    LS2-Upgrade-step8
  • Once complete, remove the RLACS161 jumper and power cycle the LabSat 2.
    LS2-Upgrade-step9

Upgrade your LabSat 2 software to use the new features

  • Download the latest LabSat Software.
  • Unzip and install the software by running the Setup executable file.
  • Ensure the USB cable is connected to the Data port on the LabSat and run the new LabSat software from the Start Menu.