LabSat 3 Turntable System: A full navigation testing solution

Posted in News

To cover for losses in satellite visibility most OEM navigation systems have a dead reckoning capability. This utilises vehicle wheel speed data and rate of turn information to provide the system with a guide to the vehicle's current location when GPS signals are not available.  

When it comes to testing these systems on the bench however, if the dead reckoning signals are not present the navigation unit will not function correctly. 

To overcome these obstructions we have developed a full navigation testing solution. Watch the video below to see how it works. 

SatGen Version 3 now includes BeiDou signals

Posted in News

SatGen v3From LabSat, the most cost effective GNSS simulator available, comes SatGen V3.

SatGen is a powerful and intuitive software package that gives you the ability to create GNSS scenarios for replay through any LabSat simulator – and now it includes BeiDou!

The software creates either user generated or imported trajectory files for use with a LabSat. The addition of the BeiDou B1 signals means that you can now test your device’s effectiveness as if it were being used within the operating area of the Chinese constellation – which at present only provides full coverage in Asia.

The BeiDou constellation is set to become globally operational by 2020. With the new SatGen you can create scenarios that include signals from satellites yet to be launched, so that you can develop new products in readiness for the full constellation.

SatGen V3 can produce scenarios with one, two, or three sets of signals being simultaneously output: GPS, GLONASS, and now BeiDou. If you have a triple constellation LabSat 3 the software now matches the record and replay abilities of your hardware.

If you’ve never used SatGen before, why not try it out? Our free to use demo version is available from here.

To purchase a full copy please contact your LabSat distributor.

LabSat presenting in Market Insight Seminar from GPS World

Posted in News

RACELOGIC founder and Managing Director, Julian Thomas, was speaking at the GPS World Seminar 'Fix the Future Now with Signal Simulators' on March 19, 2015.

JulianFix the Future Now with Signal Simulators

Date: Thursday, March 19, 2015
Time: 1pm EST/ 10am PST/ 5pm GMT
Duration: 60 minutes with additional time for Q&A

Follow this link to watch a recording of the webinar.

Understand the whys and hows of simulating signal problems now to avoid real-world problems later when newly released GNSS products encounter unanticipated problems in the field.

As the number of critical applications that rely on positioning, navigation and timing (PNT) increases, the list of considerations for testing also grows.

Topics addressed include leap seconds (next one coming up in June!), multipath, and interference of all sorts. The stakes for attacks on GNSS technologies are rising as incidents increase from occasional, often accidental, interference to more structured and organized approaches to jamming and spoofing.

Other speakers include Mark Wilson - Vice President of IFEN Inc., Neal Fedora - Director at Spirent Federal Systems Inc. and Darren Fisher - GNSS Market Manager at Spectracom.

The webinar will be moderated by Alan Cameron, Group Publisher, GPS World and Geospatial Solutions.

The BeiDou Leap Second Issue: Beware!

Posted in News

Whilst creating customer scenarios for the forthcoming leap second event this June, a rather surprising issue has come to light.

BeiDou uses a different "day number" for the date to apply the leap second, compared with GPS and Galileo. GPS and Galileo use 1-7 as week day numbers, and BeiDou uses 0-6.

We discovered that this fact has been missed during development of some BeiDou enabled receivers. The result is that the leap second may be implemented a day early on GNSS engines that are tracking the BeiDou constellation. The error presents itself when the receiver is running on the BeiDou constellation alone, and when the date is June 29 of this year.

Read the full article on the BeiDou leap second issue in GPS World.

GPS world article on beidou issue

Testing leap second performance of your GPS device

Posted in News

Did you know that you can simulate leap second corrections with LabSat, including the one on 30th June 2015?

LabSat customers who have registered their unit can now download a leap second scenario that simulates the leap second event on 30th June 2015. Request the LabSat Leap Second Scenario for free.

If you have purchased SatGen software, you can also simulate previous leap second events (e.g. updated in Dec 2008) to test the robustness of your device. The latest SatGen v3 software release offers leap second events dating back to 1980.

Leap Second