Software & Firmware

Posted in Customers

Please click on blue item header to expand or collapse its content.

LabSat 3 Wideband

  Change Log
Updated
LabSat 3 Wideband Firmware (.zip) 1.0.461 08/2018
LabSat Scenario Converter 2.5.0 10/2017
LabSat 3 Extensions Software 1.0.6 04/2018

How do you run the update?
1) Download the zip file by clicking on 'LabSat 3 Wideband Firmware'.
2) Unzip and extract the .RUF file.
3) Place the .RUF file in the root directory of an SD card
(not in the media or any other folder).
4) Power up the LabSat 3 unit.
5) Load the SD card into the front panel.

 

LabSat 3

  Change Log
Updated
LabSat 3 Firmware (.zip) 01.09b1099 12/2018

NOTE: Only LabSat 3 customers with unit serial numbers 033353 or above can use this upgrade (v01.05b1033) to enable CAN arbitration.

LabSat 3 customers with unit serial numbers lower than 033353 that have not been upgraded (purchased before the end of March 2014) will need to send the unit in for an upgrade.

For more information on the remote control function please contact your distributor or labsat@racelogic co.uk.

How do you run the update?

1) Download the zip file by clicking on 'LabSat 3 Firmware'.
2) Unzip and extract the .UPGRADE file.
3) Place the .UPGRADE file in the root directory of an SD card
(not in the media or any other folder).
4) Power up the LabSat 3 unit.
5) Load the SD card into the front panel.

  Change Log
Updated
LabSat 3 PC Comms Driver (.zip) 6.8.8.0 02/2014

LabSat 3 Communication Drivers are required to connect a Windows PC to the LabSat for NMEA data via the A to B USB cable.

  Change Log
Updated
LabSat 3 Extensions Software 1.0.6 04/2018
LabSat Scenario Converter 2.5.0 10/2017

SatGen v3 Software

  Change
History
Updated
SatGen v3 Software (.zip)

SatGen v3 simulation software has been designed to match the LabSat 3 simulator range.

This is a full version of SatGen which runs with the dongle (?) that you receive when purchasing the software. Without the dongle the software is restricted to run for only 120 seconds when creating GPS only scenarios. It will run for 30 days before a suitable dongle is required to create any scenario files. 

Please note that the SatGen v3 simulation software requires a 64 bit windows operation system and will not install on a 32 bit system. SatGen versions 3.11.19 and higher also require .NET Framework 4.7.2. More PC requirements here.

3.11.39 07/2019

LabSat and LabSat 2

  Change Log
Updated
LabSat & LabSat 2 Software - Installation for Windows 2.8.0 06/2015
LabSat 2 Firmware 2.0 11/2012
Racelogic Upgrader - Required to upgrade LabSat 2 1.2b78 12/2014
LabSat Scenario Converter 2.5.0 10/2017

Step by Step instructions to upgrade LabSat 2

Customer Support

Posted in Customers

Can't see the form? - Please refresh the page by pressing F5 or the refresh page iconreload icon in your browser menu.

We believe good technical support is absolutely vital. Being responsible for final testing of all new products and upgrades, our Support team gain an in-depth knowledge of every aspect and feature of our products.