SatGen GNSS Signal Simulation

SatGen Signal Simulation Software can be used with LabSat Wideband to simulate all major constellations and signals. If you need to record, replay or simulate multi-frequency, multi-constellation signals, then we have an easy to use, and cost-effective solution. SatGen software allows you to create a GNSS RF I&Q or IF data file based on a user-generated trajectory file that can be replayed on a LabSat GNSS Simulator. This allows you to simulate almost any kind of test, at a set time and date, anywhere in the world. For example, say you are based in Europe, but your GPS devices will be...

阅读全文: SatGen GNSS Signal Simulation

  • Hits: 1621

SatGen GNSS Signal Simulation Software

SatGen Signal Simulation Software can be used with LabSat Wideband to simulate all major constellations and signals. If you need to record, replay or simulate multi-frequency, multi-constellation signals, then we have an easy to use, and cost-effective solution. SatGen software allows you to create a GNSS RF I&Q or IF data file based on a user-generated trajectory file that can be replayed on a LabSat GNSS Simulator. This allows you to simulate almost any kind of test, at a set time and date, anywhere in the world. For example, say you are based in Europe, but your GPS devices will be...

阅读全文: SatGen GNSS Signal Simulation Software

  • Hits: 825

SatGen Signal Simulation Software

SatGen Signal Simulation Software can be used with LabSat Wideband to simulate all major constellations and signals. If you need to record, replay or simulate multi-frequency, multi-constellation signals, then we have an easy to use, and cost-effective solution. SatGen software allows you to create a GNSS RF I&Q or IF data file based on a user-generated trajectory file that can be replayed on a LabSat GNSS Simulator. This allows you to simulate almost any kind of test, at a set time and date, anywhere in the world. For example, say you are based in Europe, but your GPS devices will be...

阅读全文: SatGen Signal Simulation Software

  • Hits: 1122

Step by Step instructions to upgrade LabSat 2

Upgrade your firmware Download the Racelogic Upgrader software that is used to upgrade your LabSat 2. Unzip and install the software by running the Setup executable file. Plug the upgrade jumper (RLACS161) into the LabSat 2 D-type connector. Connect the power supply to the LabSat 2. Connect the mini-USB cable between the "GPS Monitor" port on the LabSat 2 and the computer. Download the latest LabSat 2 firmware. Unzip and double click on the firmware upgrade .RUF file. The upgrade process will start automatically once you have confirmed that the upgrade pin has been grounded in step...

阅读全文: Step by Step instructions to upgrade LabSat 2

  • Hits: 504868

更多文章...

feedback