3.11.39 - July 2019 -------------------- - Feature: Galileo signals added: E1 B/C, E5a, E5b, E6 B/C. Dummy navigation message transmitted on E6. - Feature: BeiDou B3-I signal added. - Feature: Elevation mask can now be set to "True horizon". This is very useful for space simulations where more and more satellites become visible when the rocket is climbing. - Feature: Racelogic almanac server is now used for downloading almanacs. - Feature: Signal-to-noise ratio controls have been removed. From now on, SatGen always generates pure signal without any artificial noise added. - Feature: BeiDou almanacs can now be downloaded from the server. - Feature: SatGen now officially supports space simulations. - Change: BeiDou B1-2I signal removed. - Change: A single check box is now displayed for GPS L5 in place of two separate check boxes for GPS L5 I and GPS L5 Q. GPS L5 is one signal, which consists of data and pilot components, which are always transmitted together: L5 = L5I (data) + L5Q (pilot) Same rule applies for the new Galileo signals: E1 B/C = E1B (data) + E1C (pilot), E5a = E5aI (data) + E5aQ (pilot), E5b = E5bI (data) + E5bQ (pilot), E6 B/C = E6B (data) + E6C (pilot) - SatGen UI: All signals unavailable for the currently plugged dongle or for the device are greyed out. - Optimization: Galileo E1 B/C is transmitted on the same frequency as GPS L1 C/A hence those two signals are treated as one constellation when using single-, dual- and triple-constellation dongles. - Optimization: Almanacs transmitted in the navigation message are now updated at an interval appropriate for the constellation (e.g. once per day for GPS). - Change: GPS rollover almanac removed from the installer as rollovers can now be simulated with any almanac. - Optimization: Memory management improved. - Especially significant for space simulations. - Optimization: GPS L5 performance improved by 11% - Optimization: Optimal algorithm is now used to split the requested signals into LabSat 3 Wideband output channels and choose best centre frequencies and bandwidths. - Misc: HASP HL drivers updated to version 7.91. - Optimization: EGM96 GEOID is now available (previously we only had EGM84, but most of modern receivers, especially the high grade ones, use EGM96) - Optimization: Running real time simulations no longer requires administrator privileges. After recent changes, running SatGen as user is faster than running it as administrator. - Misc: Simulation engine now performs some basic sanity checks on the input NMEA file and an error message is displayed if samples are missing, timestamps are wrong or sampling rate is not consistent. - Misc: Racelogic Clock sync intervals changed to 15m, 1h, 3h. Default: 1h. - Optimization: Slightly tweaked signal bandwidths for LabSat 3 Wideband. - Optimization: Improved error handling (informative message boxes displayed in situations where previously the error was quietly logged to a file). - Bugfix: L2C and L5 navigation message checksums corrected - Bugfix: Several SatGen UI bug fixes - Bugfix: Detected NMEA file errors were written to the log file twice. 3.11.26 - November 2018 ------------------------ - SatGen UI: Default signal to noise ratio changed to 4dB below the maximum. - SatGen UI Bug Fix: Google Maps was displayed in Developer Mode. - SatGen UI Bug Fix: only GPS L1C/A was available with a single constellation dongle plugged in. - Optimization: height limit of 2000km is no longer in force, SatGen can now efficiently simulate trajectories even beyond the geostationary orbit.The maximum heights when simulating different constellations are: GPS – 56000 km, GLONASS – 57000 km, BeiDou – 40400 km - Optimization: Racelogic Clock now uses a mono-spaced font to prevent digits from moving when displaying different values. 3.11.19 - September 2018 ------------------------ - Optimization: Performance improved by 12%. - Bugfix: Wrong ephemeris parameters transmitted by BeiDou geostationary satellites (SV 1 to 5) directly after crossing a BDS week boundary. - Bugfix: Wrong ephemeris was causing very short signal drop-outs every even hour for GPS and every half an hour for GLONASS. - Optimization: Newest HASP driver is now included in SatGen Installer. - Bugfix: Occasionally (near the BeiDou week boundary) the "toa" (Time of Almanac) parameter in the BeiDou navigation message was wrong. This had no effect on the position reported by receivers. - Bugfix: Most of satellites rising during the simulation had wrong ephemeris and receivers were not able to get a lock. - Feature: New EULA for SatGen installer. - Optimization: Several changes improving simulation accuracy. - Optimization: Simulating highly dynamic trajectories is now much improved. - Bugfix: LabSat 2 Real Time simulations no longer write exceptions to the log file when closing. - Feature: Support added for GPS L1P, L2P, L2C, L5I, L5Q, L1M (noise), L2M (noise), GLONASS L2OF and BeiDou B1-2 I, B2I. All signals can be selected simultaneously for LabSat 3 Wideband with a Wideband dongle plugged in. - Optimization: "time left" estimate during simulation is now much more stable and accurate. - Feature: SatGen log files now include the simulation engine version. - Feature: Any problems experienced when writing output files (such as running out of disk space) are now reported using message boxes. - Feature: Simulation engine prevents the operating system from shutting down until the currently running simulation is fully stopped. - Feature: Simulation engine now pops up a message box if an almanac with no satellites is used. - Bugfix: Rare crash when running space simulations (satellite visibility issue when flying at orbital speeds and using negative elevation mask). - Bugfix: Crash when running extremely short simulations (e.g. 1 second – the minimum permitted simulation length). - Bugfix: Crash when no satellites in view. - Bugfix: State of the "Satellite number limit" checkbox in RealTime mode was not preserved between sessions. - SatGen UI: signal levels for individual constellations now default to their maximum values. - Feature: Negative elevation masks down to -20° are now permitted. - SatGen UI: Acquisition delay is now disabled for Static simulations. - SatGen UI Bugfix: Crash when attempting to write or create satgenV3.ini file in Program Files when running SatGen from a user (non-administrator) account. ************IMPORTANT NOTE: SatGen now requires .NET Framework 4.7.2************* 3.11.3 - February 2018 ------------------------ - Feature: Error message is now displayed when simulation engine detects an invalid almanac file (selected in the SatGen UI). - Feature: Error message is now displayed when simulation engine detects an empty trajectory. - SatGen UI Bugfix: LabSat 3 Wideband output filename had two dots after being edited manually - SatGen UI Bugfix: example scenarios were broken (Square, Figure of Eight) - SatGen UI Bugfix: German VBO file issues (comma as a decimal point still present in the nmeaInput.txt file) - SatGen UI Bugfix: NMEA file written by SatGen had the East and West swapped - SatGen UI Bugfix: if you set the simulation output to NMEA, if the file already existed, it wasn't overwritten - SatGen UI Bugfix: the velocity and acceleration values in rawoutput.txt didn't match the units in the header (the values were in cm/s and cm/s2 instead of m/s and m/s2) - SatGen UI Bugfix: generated nmeaInput.txt was longer than the defined scenario length, it contained extra samples rounding up to a whole second - Bugfix: Problem with reading geoid separation from the configuration file Profile.txt. It seems NMEA option was not working. - Almanac loading routines rewritten. - Bugfix: broken LabSat 1 output. The *.bin files didn't have the LS1 intermediate frequency applied and the resulting signal was unstable. - Bugfix: broken LabSat2 RealTime simulation for BeiDou and Glonass. Only GPS was working correctly. 3.10.7 - November 2017 ------------------------ - Bugfix: UI - VBO file import was swapping East with West. 3.10.6 - October 2017 ------------------------ - Bugfix: UI - File extension from a cancelled attempt to load a KLM or VBO file was displayed when loading an NMEA file. - Bugfix: UI - Height command with metres was freezing the software and throwing "Out of Memory" error, validation message now present. - Bugfix: UI - Comma was not accepted as a decimal point when loading VBO files. - Bugfix: The default almanacs for BeiDou were outdated. A new almanac has been added "BDS_20170822.alm" and it is automatically selected for simulations starting on 1st July 2016 and after. - Bugfix: Output files were sometimes longer than the scheduled simulation time. - Bugfix: UI - wrong distance written to the NMEA file when executing the following commands: speed=72@100m wait 4s. One NMEA sample was missing. - Bugfix: Wrong GPS L1C/A subframe was transmitted just before midnight on Saturday/Sunday night (GPS week boundary). - Feature: Support added for NMEA files with lat/long expressed as fractional degrees. - Bugfix: Simulations which were just a few seconds long were crashing. - Feature: LabSat 3 Wideband output added. 1, 2 and 3bit quantisation is available for up to 3 constellations at a time in LS3W format. - Feature: 2-bit and 3-bit files now use the AGC (Automatic Gain Control) to maintain the optimum level of quantisation. - Optimization: Performance improved by 48%. RealTime performance on machines with 2 or more physical processors improved by 68%. - Bugfix: Glonass accuracy has been greatly improved (pseudorange residuals dropped from 3-7m to 0.5-2m). - Bugfix: GPS and BDS receivers were losing satellite lock for up to one minute on a week boundary (around midnight on Saturday/Sunday night). - Bugfix: Occasional 2-second dropouts of individual satellites starting to occur after 5-6 minutes of simulation. - Feature: BeiDou GEO satellites (B1, B2, B3, B4, B5) are now implemented. Note that they will only be simulated for LabSat 3 Wideband. - Feature: Due to performance optimisations the maximum permitted trajectory height is 2000km (1243 miles). - Feature: LabSat2 and LabSat3 files now include the version of SatGen in the file header. LabSat 3 Wideband .ini files now have the SatGen version written to their [notes] section. - Bugfix: All output file names were lowercase even if the typed in output names were using Capital Letters. - Bugfix: 1-bit RealTime output was broken on all machines. - Bugfix: Both 1-bit single constellation RealTime output and 1-bit single constellation files were broken on machines with 2 physical processors. - Bugfix: "Link sliders" in RealTime mode was not working if it was already ticked on startup. - Feature: Double-clicking a signal level slider in Real Time mode moves it to its maximum value. 3.8.4 - August 2016 ------------------------ - Bugfix: UI - Fix google maps. - Feature: Real Time Simulation implemented. 3.3.3 - September 2015 ------------------------ - Bugfix: 1 bit BDS and GLONASS files not working. - Bugfix: unable to create 3 constellation scenarios for LabSat3. - Bugfix: LabSat 3 file header broken. - Bugfix: crash when simulating a GPS+BDS LabSat 3 scenario. - Bugfix: all output files (except 3-constellation LabSat 3 files) were suffering from a minor glitch - 1 in 32 output samples on average had wrong value. - Bugfix: on some machines the progress bar was occasionally going back and forth. - Bugfix: crash when satellite number 1 was missing from the almanac. - Optimization: Cancelling the simulation takes just a few seconds (previously the user had to wait at least 15 seconds). - Feature: "Days" box added in the UI to allow simulations longer than 24 hours. - UI change: the height of the main window has been reduced which means SatGen can now be run on 1024x768 screens. - Bugfix: setting noise above the default level was still generating default noise. - Feature: Added the latest broadcasted almanac for BeiDou: BDS_20150610.alm. It is automatically selected for simulations starting on 10.06.2015 or later. - Feature: The simulation progress window no longer stays on top of other windows. 3.2.3 - June 2015 ------------------------ - Support added for BeiDou simulation. 3.0.20 - February 2015 ------------------------ - Bugfix: LabSat1 output was generating unreadable signal. - Bugfix: "ghost" satellites were appearing when Glonass satellites were manually deleted from the almanac file. 3.0.19 - February 2015 ------------------------ - Bugfix: Elevation mask selected in the UI had no effect on the simulation. - Bugfix: No more problems with manually modified almanac files. - AGL and YUMA almanac files can now be loaded even if individual satellites have been manually deleted. - GLONASS simulation no longer crashes when satellites are missing from the almanac. - Bugfix: UI - fixed Google Maps scripting errors. 3.0.17 - February 2015 ------------------------ - Final implementation of GPS leap seconds - added information about the leap second which will be added on 30th June 2015. - GLONASS frequency slots are now up to date with recent constellation changes. - Front End change: Addition of VTG strings to NMEA output file. - Bugfix: resolved LabSat 2 GPS Monitor freezing problem. - Bugfix: problems with SatGen on German operating system. - Feature: ability to manually load separate almanacs for different constellations. - Feature: 2-bit output available for LabSat 2 and 3 when running a single constellation. 3.0.3 - August 2014 ------------------------ - Cosmetic changes to Labsat 3 headers. - EGM84 Height geoid Bugfix. - Bugfix for demo mode unexpectedly terminating on certain machines. - Bugfix to resolve issue with Google Earth creating .KML files with unusable dynamics. - SatGen now opens up a folder containing the output file after it has been generated to make it easier for users to locate. - Improvements to dongle detection on remote desktop connections. - LabSat 1 created scenarios now will allow receivers to obtain GPS lock. NOTE: LabSat 3 units will not play back LabSat 2 GLONASS only scenarios. These will need to be converted to Labsat 3 to play on a Labsat 3. 3.0.2 - July 2014 ------------------------ Initial Release.